5.4.4.10 Version menu
The following software versions of the network interface board can be checked.
• Main version: software version (Main version)
• Sub version: boot version
Current parameter→
Current parameter →
Setup items
Parameters
Version
• Main version
• Sub version
-
5.4.5 Setup menu 4/7
5.4.5.1 Utility menu
To perform various settings for application functions of products.
Setup items
Parameters
Utility (1/2)
ErrorDisplay
Media detection
Power on cleaning
Media width
Utility (2/2)
Print and Wipe
Utility (1/2 – 2/2)
-
* Version *
Main Ver. 1.00 a
Sub Ver. 1.00a
* Utility *
F1 →
ErrorDisp.
F3 →
OnCleaning
* Utility *
F1 →
Prn+Wipe
Description
The software version of the network interface board
is displayed.
- To shift to the previous menu.
Refer to Network setting menu
Detection
Width
(1/1)
(1/1)
Description
To set display method to the operation panel when a
minor error occurred.
Refer to ErrorDisplay menu
When media has been initialized, to perform
detection of width and front edge of the media.
Refer to Media detection menu
When cleaning should be automatically performed
with the power is turned on.
Refer to Power on cleaning menu
If media detection has not been not performed for
initial media, to set the width of the media in the tray.
Refer to Media width menu
To wipe while printing, to take care of possible
condensation on the print head nozzle plate.
• [CANCEL] key: To shift to the previous menu.
Refer to Setup menu
120
Chapter 5 : Handling the printer
← F2
← F4
← F2
AP-75037, Rev. 1.1, 24/04/2006