5.4.2.2 Origin setup menu
Sets the printing start position (origin) for printing data.
Set this when you want the re-print to blank area of the printed media by changing the layout of the printing
data.
Parameter →
Setup items
Parameters
Origin setting
• L: Media feed value
• W: Print head movement
value
(Unit: mm)
-
Notes :
•
Notes :
•
* Origin *
F1 →
Forward
F3 →
Back
L : 00500.0
When printing data from the hard disk, the printing will start from the same start
position as when the printing data was written, regardless the home position setting
value.
The origin setup menu automatically ends without pressing any key for a certain
period, to avoid drying of the print head.
Left
Right
W : 01000.0
Description
Changes the print head position and media feed
amount by operating the following keys.
• [F1] key: Feeds media forward.
• [F2] key: Moves the print head to the left.
• [F3] key: Feeds media backward.
• [F4] key: Moves the print head to the right.
• [ENTER] key: Determines the setup values, then
returns to the previous menu. Refer to Setup menu
[CANCEL] key: shifts to the previous menu.
Refer to Setup menu
92
Chapter 5 : Handling the printer
← F2
← F4
AP-75037, Rev. 1.1, 24/04/2006