Riding mode customisation: Storing Riding
Mode settings
It is possible to save the parameters set for each
riding mode.
To save the parameter settings of a Riding Mode it is
necessary to gain access to the SETTING MENU, use
buttons (1) and (2) to select the message "R.M."
(Riding Mode) and press button (4). Then use buttons
(1) and (2) to select the riding mode to change and
press button (4). Then use buttons (1) and (2) to select
"MEMORY" (flashing) and keep button (4) pressed for
2 seconds.
Any parameter change made is saved and remains in
the memory also after a Battery-OFF. If you highlight
"EXIT" and press button (4) you quit the sub-menu and
go back to previous page.
100
2
1
1
4
2
4
Fig. 53