Table of Contents
Advertisement
Diagnostic instruments
A series of screens are displayed indicating the operations required for correct diagnosis.
To determine whether the system has any internal problems, you can access the Self-diagnosis function by pressing
the corresponding icon. If any errors are present, the symbol (D) will be displayed. To determine the type of errors
present, press the Errors icon (E). Once errors have been detected, you can then resolve them through the guided
diagnosis procedure; press the Guided Diagnosis (C) icon.
The DDS tester will interrogate the electronic control unit and display the parameters analysed with their relative
values.
Testing the battery charging system
Notes
The on-screen icons used during this procedure are explained in a table at the end of this section.
You can determine the engine rpm required for the alternator to produce sufficient current to charge battery, power
the injection/ignition system and all the electrical equipment on the motorcycle. When applied to a cable, the
file:///C|/848/wsm/en/848_08_D_5_5_00.19.1.html (39 of 47) [11-6-2008 0:34:24]
WWW.PlanDeGraissage.ORG
Advertisement
Chapters
Table of Contents
