Using The Serial Monitor - Polycom KIRK 8000 Configuration Manual

Tracing

Using the Serial Monitor

Polycom, Inc.
In the Message Level list, select the trace level on which you want to add a
2
filter.
To include a specific PPID in the filter, select the number from the PPID
3
list, otherwise select Exclude.
To include a specific local number in the filter, type the number in the
4
Local Number field.
To include a specific RFP number in the filter, select the preferred number
5
from the RFP Number list, otherwise select Exclude.
When you have defined all your filter preferences, click the Set Trace
6
Filter button.
The results that are displayed on the Trace tab are now based both on the trace
level and the trace filter you have specified.
You can apply more than one filter at a time. When you want to apply another
filter, simply go through steps 1-10 again.
To Clear All Filters
From the Debug menu, click Trace filters, and then click the Clear All
a
Filters button.
The serial monitor displays information about the host and KWS8000
connection.
To View Serial Monitor Information
From the Debug menu, click Serial Monitor.
1
Figure 8-3 Viewing Serial Monitor Information
Select Follow data, to display communication information.
2
Tracing Communication
47