Unpack And Install The Hardware Components - Polycom DMA 7000 Getting Started Manual

System Configuration
Information
DNS search domains
Time zone
NTP server #1
NTP server #2
NTP server #3

Unpack and Install the Hardware Components

Polycom, Inc.
My System Values
The Polycom DMA system uses either one or two Polycom-branded Dell
servers.
To unpack and install the hardware
If you purchased Polycom RMX 2000 conference platforms (MCUs) with
1
your Polycom DMA system servers, unpack and install them as described
in the Polycom RMX 2000 Getting Started Guide.
Examine the Polycom DMA system shipping containers for damage.
2
Polycom is not responsible for damage sustained during shipment of this
product.
Open and review the container packing slips.
3
Open the containers and examine the contents. A single-node Polycom
4
DMA system shipment includes:
— 1 Polycom DMA system server
— 2 power cords
— 1 rack-mount kit (four-post)
— 1 bezel key
— 1 server documentation set
— 1 copy of this Polycom DMA System Getting Started Guide
— 1 Polycom DMA system installation disk (included for recovery
purposes; the software on the disk is already installed on the server)
®
Polycom DMA
Description
Space- or comma-separated list of fully
qualified domain names to query on the DNS
servers to resolve host names (optional). The
system domain is added automatically; you
don't need to enter it here.
Time zone in which the system resides.
IP address of the primary NTP time server
(optional, but strongly recommended).
IP address of a second NTP time server
(optional).
IP address of a third NTP time server
(optional).
™
System Server Setup
3