Manually Adding And Deleting System Flags - Polycom RealPresence 800s Administrator's Manual

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator's Guide
Flag
TERMINATE_CONF_AFTER_CH
AIR_DROPPED
USER_LOCKOUT
USER_LOCKOUT_DURATION_I
N_MINUTES
USER_LOCKOUT_WINDOW_IN_
MINUTES

Manually Adding and Deleting System Flags

To add a flag:
1 In the System Flags dialog box, click the New Flag button.
The New Flag dialog box is displayed.
2 In the New Flag field enter the flag name.
Polycom®, Inc.
Description
From Version 8.1, this flag's functionality is replaced by the Terminate
Conference after Chairperson Drops check box in the Profile - IVR
dialog box.
In versions prior to 8.1, if YES, sets conferences to automatically
terminate if the Chairperson disconnects from the conference. This
takes effect only if the Conference Requires Chairperson check box in
the Conference Profile Properties, IVR Tab, is selected.
Default: YES
Note: In order for the "Chairperson Exit" message to be played this
flag must be set to YES.
If YES, a user is locked out of the system after three consecutive Login
failures with same User Name. The user is disabled and only the
administrator can enable the user within the system.
Default: NO
Defines the duration of the Lockout of the user.
Value: 0 - 480
0 means permanent User Lockout until the administrator re-enables
the user within the system.
Default: 0
Defines the time period during which the three consecutive Login
failures occur.
Value: 0 - 45000
0 means that three consecutive Login failures in any time period will
result in User Lockout.
Default: 60
625