Manually Adding And Deleting System Flags - Polycom 1500 Administrator's Manual

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's Guide
Flag
USE_GK_PREFIX_FOR_PSTN_
CALLS
USER_LOCKOUT
USER_LOCKOUT_DURATION_I
N_MINUTES
USER_LOCKOUT_WINDOW_IN_
MINUTES

Manually Adding and Deleting System Flags

To add a flag:
1 In the System Flags dialog box, click the New Flag button.
The New Flag dialog box is displayed.
2 In the New Flag field enter the flag name.
3 In the Value field enter the flag value.
The flags in the Manually Added, Modified, Deleted System Flags table can be manually added
to the
MCMS_PARAMETERS_USERS tab.
Polycom®, Inc.
Description
When set to YES the Gatekeeper Prefix is included in the DTMF input
string enabling PSTN participants to use the same input string when
connecting to an Collaboration Server whether the Collaboration
Server is a standalone MCU or part of a DMA solution deployment.
Possible Values: YES / NO
Default: NO
For more information see
If YES, a user is locked out of the system after three consecutive Login
failures with same User Name. The user is disabled and only the
administrator can enable the user within the system.
Default: NODefault in Ultra Secure Mode: YES
For details, see User Lockout.
Defines the duration of the Lockout of the user.
Value: 0 - 480
0 means permanent User Lockout until the administrator re-enables
the user within the system.
Default: 0
Defines the time period during which the three consecutive Login
failures occur.
Value: 0 - 45000
0 means that three consecutive Login failures in any time period will
result in User Lockout.
Default: 60
PSTN Dial-in Using GK Prefix .
762