Iopn.mtcmicx Messages - HP NetServer AA 4000 Manual

Hp netserver aa 6200 solution release 3.0 messages
Hide thumbs Also See for NetServer AA 4000:
Table of Contents

Advertisement

Chapter 12

IOPn.MtcMICX Messages

IOPn.MtcMICX: MtcMICX could not initialize the driver due to an error or resource failure.
Severity
Error
Description
MtcMICX could not be initialized during startup because it could not obtain a particular
resource, or it detected a fatal error. MtcMICX is not loaded, and the IOP cannot join the HP
NetServer AA configuration.
See the data code table on
additional data. The table lists the corrective actions for the specific error codes.
Action
• View the event detail as Words, and find the last word, which indicates the error code.
• Find the corresponding code in the table beginning on
page 12-173
Refer to
Figure 12-2
for an example of event detail indicating the error code.
Note: Data prior to the last word containing the error code may provide additional
information, but the specific error code is always listed in the last word.
The description for each code indicates whether additional data are provided.
corrective action you should perform.
If you cannot identify the specific problem from the error code, contact your service
provider for assistance.
for a description of the specific errors indicated by the
page 12-173
MtcMICX Messages
to determine the
171

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netserver aa 6200

Table of Contents