HP NetServer AA 4000 Manual page 292

Chapter 13
IOPn.MtcMon status: The CE operating system cannot be synchronized.
Severity Error
Description A condition in the Endurance server prevents the CE operating system from being properly
synchronized.
Hardware/Software This message is generated because a software condition exists in the CE operating system
which requires a reboot of the operating system to resolve.
Action Additional data in the event log specifies why synchronization cannot be performed. Contact
your service provider to resolve the condition.
IOPn.MtcMon status: The CE operating system cannot be synchronized. A debug environment is active.
Severity Error
Description The CE operating system cannot be synchronized because the CE is running a version of
Windows NT and/or the Endurance server software that has debugging enabled.
Hardware/Software This message is generated because a software condition exists in the CE operating system
which requires a reboot of the operating system to resolve.
Action Disable the CE debug environment and reboot the CE operating system.
IOPn.MtcMon status: The CE operating system cannot be synchronized. The CE hardware platform is not supported.
Severity Error
Description The CE operating system cannot be synchronized because the CE hardware is not supported
by this Endurance software.
Hardware/Software This message is generated due to a hardware condition which exists in the CE and which
requires a reboot of the operating system to resolve.
Action • Check for any updates to the Endurance software that enables support for your platform.
• Replace the existing CEs with CEs that are supported by this version of Endurance
• If this problem persists, contact your service provider for assistance.
282
software. Refer to the HP NetServer AA 6200 Solution Release Notes (Release 3.0 Service
Pack 1) for information about platforms supported by this version of Endurance software.
MtcMon Messages