HP NetServer AA 4000 Manual page 289

Chapter 13
IOPn.MtcMon status: The CE MIC microcode revisions are not compatible.
CE1 MIC microcode revision = 0xx.
CE2 MIC microcode revision = 0xy.
Variables x – the revision of the MIC module microcode in CE1
y – the revision of the MIC module microcode in CE2
Severity Error
Description The revisions of the microcode in the MIC modules in the CEs are not compatible. The major
and minor version numbers of the revisions must match exactly for the CEs to synchronize.
Hardware/Software This message is generated as a result of a difference in the microcode revisions of the MIC
modules in the CEs.
Action To correct this condition, note the microcode revisions and run the MTCFLASH Utility to
update the microcode on one or both CEs. (Refer to the
Release Notes (Release 3.0 Service Pack 1)
Chapter 7
MTCFLASH.
IOPn.MtcMon status: The CE MIC module edit levels do not match.
CE1 MIC module revision = 0xx.
CE2 MIC module revision = 0xy.
Variables x – the revision of the MIC adapter in CE1
y – the revision of the MIC adapter in CE2
Severity Warning
Description The edit level field of the MIC adapter revision information in CEs 1 and 2 does not match.
While the CEs will be allowed to synchronize, this situation should be corrected to eliminate
any potential for unexpected behavior between the CEs.
Hardware/Software This message is generated as a result of different revision levels between the MIC adapters in
the two CEs. This can be resolved by installing matching MIC adapters in the CEs.
Action To resolve this condition:
• Determine the CE whose MIC contains the appropriate revision of the MIC adapter. Refer
• Remove the other CE from the configuration and replace its MIC adapter with one that
in HP NetServer AA Solution Administrator's Guide
to the HP NetServer AA 6200 Solution Release Notes (Release 3.0 Service Pack 1)
determine the appropriate MIC adapter revision.
matches that in the CE with the appropriate adapter.
MtcMon Messages
HP NetServer AA 6200 Solution
for microcode revision information.) Refer to
for information about using
to
279