Mtcflor Status Messages - HP NetServer AA 4000 Manual

Chapter 9

MtcFLOR Status Messages

MtcFLOR status: The Floppy Redirector attempted to create a floppy device, but failed. As a result, that floppy device
will be inaccessible.
Severity Error
Description The floppy device failed initialization. This error usually occurs because the device is not
configured properly.
Action • Using the HP NetServer AA Configuration Utility, check the configuration information
• Make any necessary corrections. Remember that when you make a change using the HP
• Because any changes will not take effect until the IOP reboots, schedule an appropriate
MtcFLOR status: The Floppy Redirector received an invalid sync-up response from the Floppy Provider. As a result,
the floppy devices will be inaccessible.
Severity Error
Description An internal error has occurred.
Action • Using the HP NetServer AA Configuration Utility, check the configuration information
• Make any necessary corrections. Remember that when you make a change using the HP
• Because any changes will not take effect until the IOP reboots, schedule an appropriate
MtcFLOR status: The registration of MtcFloR with the CE Transport failed.
Severity Error
Description An internal error has occurred.
Action Contact your service provider for assistance.
that you supplied for each floppy device.
NetServer AA Configuration Utility, you must make the same change on both IOPs. (The
IOPs must contain identical configuration files.)
time to reboot the affected IOP or the entire server.
that you supplied for each floppy device.
NetServer AA Configuration Utility, you must make the same change on both IOPs. (The
IOPs must contain identical configuration files.)
time to reboot the IOPs.
MtcFLOP and MtcFLOR Messages
151