HP NetServer AA 4000 Manual page 253

Chapter 13
IOPn.MtcMon status: CEx failed to inhibit IPMI global interrupts.
Variables x – the ID of the CE that attempted to disable the IPMI interrupts
Severity Warning
Description Because the IPMI was not found, when the CE software attempted to disable the generation of
SMIs though the IPMI, it was unsuccessful. This failure may result in the CEs failure to
maintain lockstep operation.
This information is logged on the IOP that controls the booting and synchronizing of the CEs.
Hardware/Software This message is generated as a result of CE hardware configuration information.
Action If you need help in determining whether you are using a qualified CE in your Endurance server,
contact your service provider.
•
IOPn.MtcMon status: CEx has been disabled by operator request.
Variables x – the ID of the CE that has been disabled
Severity Warning
Description This message is generated when a CE Disable or Tuple Disable command is successfully
executed.
Related Messages
IOPn.MtcMon status: CEx has been removed from service.
Hardware/Software This message is generated as a result of a software condition.
Action No action is required. The CE has been successfully disabled.
MtcMon Messages
243