HP NetServer AA 4000 Manual page 255

Chapter 13
IOPn.MtcMon status: CEx has provided platform device information.
Chipset: vendor chipset.
Memory mode: mode.
IPMI found: Y/N
Variables x – the CE for which platform device information is detected
vendor chipset – the vendor of the chipset in CEx
mode – the type of memory in CEx
Y – IPMI was found in CEx
N – IPMI was not found in CEx
Severity Informational
Description The platform device information describes the memory controller chipset and type of memory
that is being used in the booting or synchronizing CE. It also indicates the presence of the IPMI
on the motherboard. This information is logged on the IOP that controls the booting and
synchronizing of the CEs.
Hardware/Software This message is generated as a result of CE hardware configuration information.
Action No action is required.
IOPn.MtcMon status: CEx is available to be booted or synchronized.
Variables x – the ID of the CE that is available for booting or synchronization
Severity Informational
Description The CE has completed power-on self tests and is available to the local IOP to be booted or
synchronized into the Endurance server configuration.
Related Messages
IOPn.MtcMon status: The boot process has started for CEx
IOPn.MtcMon status: The synchronization process has started for CEx.
Hardware/Software This message is generated as a result of the opening of a communications path over the
physical connection between the CE and the local IOP.
Action • If the CE is subsequently booted or synchronized, no action is required.
• If it is not, examine the event log to determine the reason.
MtcMon Messages
245