HP NetServer AA 4000 Manual page 141

Chapter 7
IOPn.MtcEtx status: Error accessing data in the Registry.
Severity Error
Description During initialization, MtcEtx reads NIC binding information and optional parameter values
from the Windows NT Registry. This message is logged if MtcEtx is unable to read the
Registry. MtcEtx fails initialization because the NIC binding information is unavailable.
Action Run the Network Control Panel application.
• Remove the MtcEtx service.
• Reboot the IOP.
• Reinstall the MtcEtx service.
• Reboot the IOP. Refer to
IOPn.MtcEtx status: Error in NIC bindings; initialization aborted.
Severity Error
Description This message is logged during initialization, when MtcEtx verifies the NIC bindings for the IL
adapter. It is generated if MtcEtx is not bound to a single NIC, and indicates that there is an
error in the bindings that were established in the Network Control Panel application.
Action Run the Network Control Panel application and modify the bindings.
IOPn.MtcEtx status: Error transferring incoming Ethernet packet to the receive buffer.
Severity Warning
Description The IL adapter was unable to copy an Ethernet packet to a receive buffer owned by MtcEtx.
The Event Viewer Data section contains the Windows NT (NdisTransferData) error code.
This message is usually logged because the NIC was reset while a receive was in progress.
Chapter 9
for information about how to reboot an IOP.
MtcEthP and MtcEtx Messages
in HP NetServer AA Solution Administrator's Guide
131