HP NetServer AA 4000 Manual page 191

Chapter 13
Message
IOPn.MtcMon Fault Handler status: The joining IOP encountered an error or operator action that
caused it to shut down before it completed the joining process.
IOPn.MtcMon Fault Handler status: The joining IOP has received a Fault Handler join request from
another IOP, but the local IOP state is incorrect.
IOPn.MtcMon FRU: CEx MIC fault.
IOPn.MtcMon FRU: CEx Power supply failure.
IOPn.MtcMon FRU: CEx processing capability failure.
IOPn.MtcMon FRU: IOP operating system or subcomponent failure.
IOPn.MtcMon FRU: IOP1 <-> IOP2 interconnect fault.
IOPn.MtcMon FRU: IOP1 or IOP2 processing capability failure or data set divergence.
IOPn.MtcMon FRU: IOPx MIC fault.
IOPn.MtcMon FRU: IOPx Power supply failure.
IOPn.MtcMon FRU: IOPx processing capability failure.
IOPn.MtcMon FRU: IOPx <-> CEy cross tuple fault.
IOPn.MtcMon FRU: IOPx <-> CEy interconnect fault.
IOPn.MtcMon FRU: IOPx IOP-IOP Link (IL) netcard capability, cabling, or remote netcard.
IOPn.MtcMon FRU: IOPx/CEy tuple power supply failure.
IOPn.MtcMon FRU: IOPx <-> CEx tuple processing capability failure.
IOPn.MtcMon FRU: Local hardware fault on IOPx.
IOPn.MtcMon FRU: Processing capability failure on unspecified CE.
IOPn.MtcMon FRU: Processing capability failure on unspecified IOP.
IOPn.MtcMon FRU: Target operating system or subcomponent failure.
IOPn.MtcMon FRU: The MIC on Compute Element CEx has detected a misconnected cable on its
IOPy port, or the CEx MIC has had its ID set incorrectly.
IOPn.MtcMon FRU: The MIC on I/O Processor IOPx has detected a misconnected cable on its CEy
port, or the CEy MIC has had its ID set incorrectly.
IOPn.MtcMon FRU: Uncorrectable memory error on CEx
Table 13-1 IOPn.MtcMon Messages (Continued)
MtcMon Messages
Page
page 199
page 200
page 201
page 201
page 202
page 202
page 203
page 203
page 204
page 204
page 204
page 205
page 206
page 206
page 207
page 207
page 208
page 208
page 209
page 209
page 210
page 210
page 211
181