HP NetServer AA 4000 Manual page 232

Chapter 13
IOPn.MtcMon status: An Endurance Manager command has been issued to remove CEx.
Variables x – the ID of the CE to be removed
Severity Warning
Description This message is generated as a result of issuing a CE Remove command.
Related Messages
IOPn.MtcMon status: CEx has been removed from service.
IOPn.MtcMon status: The CE remove or disable operation failed.
Hardware/Software This message is generated as a result of a software operation.
Action No action is required unless this message is followed by the messageIOPn.MtcMon
status: The CE remove or disable operation failed. In this case, see the
message IOPn.MtcMon status: The CE remove or disable operation
failed for corrective action.
IOPn.MtcMon status: An Endurance Manager command has been issued to shut down IOPx.
Variables x – the ID of the IOP to be shut down
Severity Warning
Description This message is generated as a result of issuing an IOP Shutdown command.
Related Messages
IOPn.MtcMon status: IOPx is being shut down by operator request.
IOPn.MtcMon status: IOPx has been removed from service.
IOPn.MtcMon status: The IOP shutdown or disable operation failed.
IOPn.MtcMon status: The Windows NT operating system on the local IOP is
being shut down.
Hardware/Software This message is generated as a result of a software operation.
Action No action is required unless this message is followed by IOPn.MtcMon status: The
IOP shutdown or disable operation failed. In this case, see the message
IOPn.MtcMon status: The IOP shutdown or disable operation failed
for corrective action.
222
MtcMon Messages