HP NetServer AA 4000 Manual page 291

Chapter 13
IOPn.MtcMon status: The CE MIC PCI device addresses do not match.
CE1 PCI address = 0xx.
CE2 PCI address = 0xy.
Variables x – the PCI device address of the MIC adapter in CE1
y – the PCI device address of the MIC adapter in CE2
Severity Error
Description The message indicates that the MIC adapters in the CEs are not assigned identical PCI device
addresses. The CEs cannot be synchronized unless the MIC adapter PCI device addresses
match exactly.
Hardware/Software This message is generated as a result of a hardware configuration error in the CEs.
Action To resolve this condition, do one of the following:
• Power down one of the CEs and reinstall the MIC adapter so that it is in the same slot and
• Power down both CEs and reinstall the MIC adapters so that they are in the same slots and
IOPn.MtcMon status: The CE MIC PCI interrupt assignments do not match.
CE1 PCI interrupt information = 0xx.
CE2 PCI interrupt information = 0xy.
Variables x – the PCI interrupt information of the MIC adapter in CE1
y – the PCI interrupt information of the MIC adapter in CE2
Severity Error
Description The message indicates that the MIC adapters in the CEs are not assigned identical PCI interrupt
levels. The CEs cannot be synchronized unless the MIC adapter PCI interrupt information
matches exactly.
Hardware/Software This message is generated as a result of a hardware configuration error in the CEs.
Action To resolve this condition, do one of the following:
• Power down one of the CEs and reinstall the MIC adapter so that it is in the same slot and
• Power down both CEs and reinstall the MIC adapters so that they are in the same slots and
is assigned the same PCI device address as the active CE's MIC adapter.
are assigned the same PCI device address.
is assigned the same PCI interrupt level as the active CE's MIC adapter.
are assigned the same PCI interrupt levels.
MtcMon Messages
281