Mtccex Message Summary - HP NetServer AA 4000 Manual

Chapter 4

MtcCEX Message Summary

The following table lists the HP NetServer AA server MtcCEX messages in the order that they
are documented.
Message
MtcCEX: 32-bit platform-specific compatibility failure.
MtcCEX: 32-bit platform-specific initialization failed. Status = 0xyMtcCEX: 32-bit platform-specific
initialization failed. Status = 0xy
MtcCEX: Could not initialize MIC adapter. Status = 0xy
MtcCEX: Could not transition any IOP MIC port to ACTIVE.
MtcCEX: Could not transition IOPx MIC port to ACTIVE.
MtcCEX: Could not transition IOPx MIC port to DISABLED.
MtcCEX: Expected dual-processor boot, only one processor started.
MtcCEX: HP NetServer AA CE MIC Transport y is initializing.
MtcCEX: Last IOP removed via REMOVE_IOP command.
MtcCEX: Lost communications with boot IOP.
MtcCEX: MIC adapter is not configured for CE operation.
MtcCEX: MIC adapter malfunction detected.
MtcCEX: Received illegal CE control packet.
MtcCEX: Received illegal communication from non-boot IOP.
MtcCEX: Received illegal STARTUP request from boot IOP.
MtcCEX: Received illegal transport packet.
MtcCEX: Received RESET request from boot IOP.
MtcCEX: Synchronization initialization failed. Status = 0xy
MtcCEX: Unable to allocate the required resources. Status = 0xy
MtcCEX: Unable to complete initialization. Status = 0xy
MtcCEX: Unable to complete synchronization-related initialization. Status = 0xy
MtcCEX: Unable to create device object. Status = 0xy
70
Table 4-1 MtcCEX Message Summary
MtcCEX Messages
Page
page 72
page 73
page 73
page 74
page 74
page 75
page 76
page 75
page 76
page 77
page 77
page 78
page 78
page 79
page 79
page 80
page 80
page 81
page 81
page 82
page 82
page 83