HP NetServer AA 4000 Manual page 139

Chapter 7
IOPn.MtcEthP status: Timeout waiting for report primary message x (y).
Variables x – the logical device identifier for this adapter (for example, Ethernet0)
y – the Windows NT device name (for example, E100B2)
Severity Error
Description This message can occur if IOP communication is lost during Ethernet device failover. The IOP
that lost network connectivity did not receive a message from the other IOP. The Fault Handler
will deconfigure one of the IOPs.
IOPn.MtcEthP status: Unable to set Ethernet multicast address list.
Severity Error
Description This message can occur during IOP joining, when the Ethernet Provider on the joining IOP
attempts to set the Ethernet multicast address list to match that of the merging IOP. The
Ethernet device on the joining IOP is set to failed. The Event Viewer Data section contains the
Windows NT (NdisRequest) error code.
This message can also occur when the Ethernet Provider is attempting to clear the multicast
address list (after CE shutdown or when an IOP is disabled).
Action Reboot the IOP. Refer to
information about how to reboot an IOP.
IOPn.MtcEthP status: Unable to set Ethernet packet filter.
Severity Error
Description This message can occur during IOP joining, when the Ethernet Provider on the joining IOP
attempts to set the Ethernet packet filter to match that of the merging IOP. The Ethernet device
on the joining IOP is set to failed. The Event Viewer Data section contains the Windows NT
(NdisRequest) error code.
This message can also occur when the Ethernet Provider is attempting to clear the packet filter
(after CE shutdown or when an IOP is disabled).
Action Reboot the IOP. Refer to
information about how to reboot an IOP.
Chapter 9 in HP NetServer AA Solution Administrator's Guide
Chapter 9 in HP NetServer AA Solution Administrator's Guide
MtcEthP and MtcEtx Messages
for
for
129