HP NetServer AA 4000 Manual page 129

Chapter 7
IOPn.MtcEthP status: Error in Ethernet Provider device configuration.
Severity Error
Description This message is logged during Ethernet Provider initialization if an error is detected in the
Ethernet device configuration.
Action • Run the HP NetServer AA Configuration Utility and correct the configuration for the
• Using the Network Control Panel application, make sure that the adapter bindings are set
• Make sure that NetworkAddress is correctly defined in the Registry. The NetworkAddress
• Make sure that you are using a NIC that supports software settable MAC addresses.
Related Messages
IOPn.MtcEthP status: Error in Ethernet Provider NIC bindings in the
Control Panel.
See Also For binding information, refer to
adapter. There may be an error in the Ethernet adapter address specified for the logical
device.
correctly. Bind the MtcEthP driver to the adapter that provides connectivity to the local
area network.
value is defined under the subkey for the adapter
(HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
Services\adapter name#\Parameters).
MtcEthP and MtcEtx Messages
Chapter 3 in HP NetServer AA Solution Installation Guide.
119