HP NetServer AA 4000 Manual page 87

Chapter 4
MtcCEX: Lost communications with boot IOP.
Severity Error
Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE
during CE operating system boot if the HP NetServer AA CE Transport loses its
communication path to the IOP driving the boot process. The CE operating system boot
terminates.
Hardware/Software This message indicates a communications failure in the MIC subsystem.
Action • Examine the event logs on the IOPs for more information. You may see this message
• Diagnose the cause of the failure from the event logs and attempt to boot the CE again.
• If the problem persists, contact your service provider for assistance.
MtcCEX: MIC adapter is not configured for CE operation.
Severity Error
Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE
during CE operating system boot if the HP NetServer AA CE Transport detects that the CE
MIC adapter is not properly configured for CE operations.
Related Messages
MtcCEX: Unable to initialize the MIC adapter. Status = 0xy
Hardware/Software This message indicates an improperly configured MIC adapter.
Action • Reset or power cycle the CE by turning it off and then back on.
• When the MIC adapter BIOS executes, press Enter to enter the MIC BIOS setup program.
• Configure the MIC adapter with the proper CE ID, save the settings, and exit the MIC
• Reset the CE, and allow it to reboot.
• If the problem persists, contact your service provider for assistance.
when a fault occurs that results in the removal of the booting CE.
BIOS setup program.
MtcCEX Messages
77