HP NetServer AA 4000 Manual page 203

Chapter 13
IOPn.MtcMon Fault Handler status: Fault event processing complete. Removed Units: x
Variables x – the list of removed components, separated by commas, or "None" if no components were
removed
Severity Error
Description This is the last posted message in a fault handling sequence. It:
• Separates consecutive fault handling messages in the log
• Indicates which components were removed in response to the fault condition
Related Messages
IOPn.MtcMon Fault handler status: Fault event processing completed, but
there were insufficient resources to provide a complete event history.
Removed Units: x
IOPn.MtcMon Fault handler status: Fault event processing completed, but
there were insufficient resources to provide a complete event history or
log removed units.
Action Take action as appropriate for the messages that were indicated as part of the event.
IOPn.MtcMon Fault Handler status: Fault event processing complete. Removed Units: x
Variables x – the list of removed components, separated by commas, or "None" if no components were
removed
Severity Informational
Description This message does not represent a failure. Instead it resulted from an anticipated system
transition. For example, fault messages are usually logged when an IOP is removed using the
Endurance Manager. These messages are anticipated as part of normal system state transition
and do not indicate a fault condition.
Related Messages
IOPn.MtcMon Fault handler status: Fault event processing complete.
Removed units: x
Action No action is required. No failure is indicated.
MtcMon Messages
193