HP NetServer AA 4000 Manual page 348

Chapter 14
IOPn.MtcScsiP status: Mirror set copy from IOPn to IOPn for DISKx is complete.
Variables n – the IOP number; either IOP1 or IOP2
x – the disk number; for example, DISK0, DISK1, DISK2
Severity Informational
Description A mirror copy from the specified IOP for the specified disk is complete. The mirror set is now
considered current because the mirror copy source disk and the mirror copy target disk contain
identical data.
Action No action is required.
IOPn.MtcScsiP status: Mirror set copy from IOPn to IOPn for DISKx is starting.
Variables n – the IOP number; either IOP1 or IOP2
x – the disk number; for example, DISK0, DISK1, DISK2
Severity Informational
Description A mirror copy from the specified IOP for the specified disk is starting. The target disk should
transition from offline to online.
Action No action is required.
IOPn.MtcScsiP status: Mirror set copy from IOPn to IOPn for DISKx will be performed. DISKn on IOPn will be
offline until the copy begins.
Variables n – the IOP number; either IOP1 or IOP2
x – the disk number; for example, DISK0, DISK1, DISK2
Severity Informational
Description A mirror copy from the specified IOP for the specified disk will be performed. The mirror copy
is considered to be pending until it starts. The mirror copy will start only after the CEs have
been booted. The target disk will be kept offline until the copy starts.
Action No action is required.
338
MtcScsiP and MtcScsiR Messages