HP NetServer AA 4000 Manual page 95

Chapter 4
MtcCEX: Unable to initialize the MIC adapter. Status = 0xy
Variables y – an error status displayed in hexadecimal
Severity Error
Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE
during CE operating system boot when the HP NetServer AA CE Transport experiences an
unexpected failure during its initialization while initializing the MIC adapter. The CE
operating system boot terminates.
Hardware/Software This message most likely indicates a hardware failure in the CE MIC.
Action • Verify that the CE MIC is properly installed, configured, and passes its self-test.
• Replace the MIC adapter if necessary.
• If the problem persists, contact your service provider for assistance.
MtcCEX: Unable to read the Windows NT Registry. Status = 0xy
Variables y – an error status displayed in hexadecimal
Severity Error
Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE
during CE operating system boot when the HP NetServer AA CE Transport experiences an
unexpected failure during its initialization while reading the Windows NT Registry. The CE
operating system boot terminates.
Hardware/Software This message indicates a software failure, most likely a Windows NT root that is not properly
installed.
Action • Rebuild the CE root, and reinstall the HP NetServer AA software.
• If the problem persists, contact your service provider for assistance.
MtcCEX Messages
85