Chapter 2
Test mode may be canceled by pressing <Esc>.
Severity
Informational
Description
During the execution of a test, it is possible to press <Esc> to cancel the test and return the
element to use in an HP NetServer AA configuration.
Action
No action is required.
Test terminated by user
Severity
Informational
Description
The user pressed the <Esc> key during the execution of a test.
Action
No action is required.
Unable to contact destination via port port.
Severity
Error
Description
This message displays only when you are running a test that was unable to contact the
destination MIC via the specified port. Depending on the type of test that is running, this
message could indicate a malfunctioning MIC or a faulty fiber connection.
Action
• If the message displays when you are running a client-server test, perform an external
• If the message displays when you are running an external loopback test, perform an
• If the message displays when you are running an internal loopback test, replace the MIC.
58
loopback test on each MIC to determine if the problem is with the MIC or the fiber
connection.
internal loopback test to determine if the problem is with the MIC or the fiber connection.
MIC BIOS Messages