HP NetServer AA 4000 Manual page 334

Chapter 14
IOPn.MtcScsiP status: DISKn has an HP NetServer AA system ID other than the current system ID. This indicates
DISKn has come from a completely different HP NetServer AA system. The HP NetServer AA partition can be
reset to cure this condition, but caution is advised. If unsure how to proceed, contact your service provider for
assistance.
Variables n – the disk number; for example, DISK0, DISK1, DISK2
Severity Error
Description A disk that belongs to another HP NetServer AA system has been moved to the local system.
The disk must have its HP NetServer AA partition reset if it is to be used in the local HP
NetServer AA system. However, if the disk's HP NetServer AA partition is reset, it is very
likely that it will become a mirror copy target, causing any stored data on the disk to be
overwritten. Additionally, there are scenarios in which the disk could become a mirror copy
source, causing any stored data on the existing mirror set member to be overwritten. See the
action section for details.
Action This condition should only occur if a replacement disk has been taken from elsewhere and used
to replace a faulted disk.
• In this case, assuming the CEs are up and running, you can reset the disk's HP NetServer
• However, if this scenario is not desirable, or the CEs are not up and running, contact your
IOPn.MtcScsiP status: DISKn has an invalid HP NetServer AA partition type. Use the HP NetServer AA Manager to
reset the HP NetServer AA partition.
Variables n – the disk number; for example, DISK0, DISK1, DISK2
Severity Error
Description A disk will have its HP NetServer AA partition type field modified if the Windows NT Disk
Administrator is used to repartition its HP NetServer AA partition. If the disk is being added
to the HP NetServer AA configuration, HP NetServer AA software will set up the HP
NetServer AA partition type field automatically. If the type field was modified and the disk is
not being added to the HP NetServer AA configuration, then the administrator must manually
reset the HP NetServer AA partition.
Action Use the HP NetServer AA Manager to reset the HP NetServer AA partition for the disk.
Note: Resetting the HP NetServer AA partition will most likely cause the disk to become the
target
324
AA partition, and it will become a mirror copy target.
service provider before continuing.
of a mirror copy.
MtcScsiP and MtcScsiR Messages