HP NetServer AA 4000 Manual page 359

Hp netserver aa 6200 solution release 3.0 messages
Hide thumbs Also See for NetServer AA 4000:
Table of Contents

Advertisement

Chapter 14
IOPn.MtcScsiP status: Unable to restart a mirror copy for DISKn because its copy has not failed. HP NetServer AA
Manager request to restart the mirror copy was ignored.
Variables
n – the disk number; for example, DISK0, DISK1, DISK2
Severity
Error
Description
An attempt was made to use the HP NetServer AA Manager to restart a mirror copy that has
not failed. This is not allowed.
Action
No action is required.
IOPn.MtcScsiP status: Unable to shut down DISKn gracefully.
Variables
n – the disk number; for example, DISK0, DISK1, DISK2
Severity
Error
Description
HP NetServer AA software was not able to update its timestamp information before the disk
was shut down.
Action
Contact your service provider for assistance.
IOPn.MtcScsiP status: Unable to write HP NetServer AA partition for DISKn.
Variables
n – the disk number; for example, DISK0, DISK1, DISK2
Severity
Error
Description
The HP NetServer AA disk software was unable to write the HP NetServer AA partition for
the specified disk.
Action
• Reboot the IOP, bringing it up in Offline HP NetServer AA I/O Processor Mode.
• Use Disk Administrator to format the HP NetServer AA partition with either FAT or
• Reboot the IOP, bringing it up in Operational HP NetServer AA I/O Processor Mode.
• Use the HP NetServer AA Manager to reset the HP NetServer AA partition on the disk.
• If you do not want the disk to become a mirror copy target, or if the problem persists,
NTFS. Do not quick format the partition.
The disk will likely become a copy target, and a mirror copy will start.
contact your service provider for assistance.
MtcScsiP and MtcScsiR Messages
349

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netserver aa 6200

Table of Contents