HP NetServer AA 4000 Manual page 233

Chapter 13
IOPn.MtcMon status: An Endurance Manager command has been issued to shut down Tuplex.
Variables x – the ID of the tuple to be shut down
Severity Warning
Description This message is generated when a command is issued to shut down a tuple. As a result, the IOP
Monitor attempts to remove the tuple from operation by resetting or shutting down the CE and
then shutting down the IOP.
Related Messages
IOPn.MtcMon status: An Endurance Manager request to shut down the
operating system on the CE(s) could not be performed because shutdown is
already in progress.
IOPn.MtcMon status: The Windows NT operating system on the CE(s) is being
shut down.
IOPn.MtcMon status: The Windows NT operating system on the active CE(s)
has been shut down by operator request.
IOPn.MtcMon status: The Tuplex shutdown or disable operation failed.
IOPn.MtcMon status: CE operating system shutdown has been requested by
the operator.
IOPn.MtcMon status: The CE operating system shutdown request failed.
IOPn.MtcMon status: The Tuplex shutdown or disable operation failed.
IOPn.MtcMon status: IOPx is being shut down by operator request.
IOPn.MtcMon status: IOPx has been removed from service.
IOPn.MtcMon status: The CE remove or disable operation failed.
IOPn.MtcMon status: CEx cannot be removed because it is already offline.
IOPn.MtcMon status: CEx has been removed from service.
Hardware/Software This message is generated as a result of issuing a command to the IOP Monitor.
Action No action is required. This message precedes tuple shutdown messages.
MtcMon Messages
223