Chapter 13
IOPn.MtcMon Fault Handler status: Fault event processing completed, but there were insufficient system resources to
provide a complete event history. Removed Units: x
Variables
x – the list of removed components, separated by commas, or "None" if no components were
removed
Severity
Informational
Description
This is the last posted message in a fault handling sequence. It:
• Indicates that the event log does not contain a complete transcript of all fault information.
• Indicates which components were removed in response to the fault condition.
• Separates consecutive fault handling messages in the log.
Related Messages
IOPn.MtcMon Fault handler status: Fault event processing complete.
Removed units: x
Action
An error is not explicitly indicated. However, this message indicates that the memory
resources on the reporting IOP were severely constrained. If possible, free memory on the IOP
by removing unneeded applications or services.
IOPn.MtcMon Fault Handler status: Fault information dump.
Severity
Informational
Description
This message provides a cross-reference to fault information stored in the MtcFh.hrl file. This
message is only a cross-reference to fault message detail; it is not indicative of any particular
condition.
Action
No action is required.
There was insufficient memory to log the message.
MtcMon Messages
195