HP NetServer AA 4000 Manual page 256

Chapter 13
IOPn.MtcMon status: CEx is FAULTED and requires repair.
Variables x – the ID of the CE that is faulted
Severity Error
Description The CE specified in the message has experienced one or more failures that prevent it from
being used in the Endurance server configuration. The CE remains in the faulted state until you
resolve the situation.
Related Messages
IOPn.MtcMon status: CEx has been removed from service.
Hardware/Software This message is generated as a result of a software or hardware failure. In most cases, a
hardware failure prevents you from using the CE.
Action • Examine the event log for additional details about the reason for the failure.
• If a hardware problem is indicated, repair or replace any affected hardware as necessary.
• If a software problem is indicated, replace the software component or reconfigure the
• Once you resolve the condition, issue a CE Enable Operation command for the faulted
246
software as necessary.
CE, and the Endurance server attempts to reconfigure the CE.
MtcMon Messages