Iopn.mtcflop Status Messages - HP NetServer AA 4000 Manual

Chapter 9

IOPn.MtcFLOP Status Messages

IOPn.MtcFLOP status: An error has occurred that prevented proper initialization of the Floppy Provider. The provider
has registered with the DSL, but may not allow access to the floppy drives.
Severity Warning
Description An error prevented the HP NetServer AA software from properly initializing. The error was
not fatal, but it may prevent floppy devices from being accessible to the CE.
Related Messages
IOPn.MtcFLOP status: The Floppy Provider attempted to attach a floppy
device to the floppy driver's device object, but failed. As a result,
that floppy device will be inaccessible.
IOPn.MtcFLOP status: The Floppy Provider attempted to create a floppy
device, but failed. As a result, that floppy device will be inaccessible.
IOPn.MtcFLOP status: The Floppy Provider attempted to respond to a
request, but it was unable to send the reply back to the Redirector.
IOPn.MtcFLOP status: The Floppy Provider could not register with the DSL.
IOPn.MtcFLOP status: The registration of logical devices failed. This
indicates a setup problem with the FLOP subkey under Marathon\Providers
in the Registry.
Action • Check the Event Viewer for one of the HP NetServer AA messages listed above that was
• A previously logged message indicates the cause of this message; refer to the description
logged prior to this message.
of that message for more information.
MtcFLOP and MtcFLOR Messages
147