Chapter 9
IOPn.MtcFLOP status: The registration of logical floppy devices failed. In most cases, this indicates a setup problem
with the FLOP subkey under Marathon\Providers in the Registry.
Severity
Error
Description
The Windows NT Registry does not accurately define the floppy devices on this IOP. The
Registry information for floppy devices is automatically supplied, based on the parameters that
you supplied using the HP NetServer AA Configuration Utility.
Action
• Using the HP NetServer AA Configuration Utility, check the configuration information
• Make any necessary corrections. Remember that when you make a change using the HP
• Because any changes will not take effect until the IOP reboots, schedule an appropriate
150
that you supplied for each floppy device.
NetServer AA Configuration Utility, you must make the same change on both IOPs. (The
IOPs must contain identical configuration files.)
time to reboot the IOPs.
MtcFLOP and MtcFLOR Messages