Table of Contents
Advertisement
This chapter provides an overview of the Power-On Self-Test (POST), the POST error
messages, and BIOS, SCSI and SATA setup utilities.
POST
POST is a series of diagnostic tests that checks firmware and assemblies to ensure that the
server is properly functioning.
POST runs automatically on HP servers when the server is powered up.
POST Error Messages
Error messages that display during the POST process describe what prevents the server from
completing the boot process. Refer to Table 3-1.
Table 3-1: POST Error Messages
Error Code
0200
0210
0211
0212
0213
0220
0250
0251
0252
0260
0270
HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 4/19/05 5:18 PM
Diagnostic Tools and Setup Utilities
Error Type
Extend error
Extend error
Extend error
Extend error
Extend error
Extend error
Extend error
Extend error
Extend error
Extend error
Extend error
Error Message
Failure fixed disk
Stuck key
Keyboard error
Keyboard controller error
Keyboard locked - Unlock key switch
Monitor type does not match CMOS - Run SETUP
System battery is dead - Replace and run SETUP
System CMOS checksum bad - Default configuration
used
Password checksum bad - Passwords cleared
System timer error
Real time clock error
3
continued
3-1
Advertisement
Table of Contents
