HP NetServer AA 4000 Manual page 20

Chapter 1
Table 1-4HP NetServer AA Message Summary – Unprefixed Messages (Continued)
Message
A field entry in the MTCSMAPI.DLL contains incorrect data.
A function entry in the MTCSMAPI.DLL contains incorrect data.
A non-critical error occurred initializing the Keyboard Pointer Redirector.
A provider entry in the MTCSMAPI.DLL contains incorrect data.
A provider entry in the MTCSMAPI.DLL contains incorrect target data.
A required parameter is missing.
An action entry in the MTCSMAPI.DLL contains incorrect data.
An enumeration entry in the MTCSMAPI.DLL contains incorrect data.
An internal error has occurred in the Retrieval library.
An invalid parameter was provided by the caller.
Automatic reboot in x seconds.
Beginning boot process with IOPx. . .
Beginning synchronization with CEy via IOPx. . .
Confirm: Changes made to MIC settings have not been saved. Press <Esc> to return to
setup; press <Enter> to exit.
Confirm: The selected test mode will run on exit in place of system startup. Press <Esc> to
return to setup; press <Enter> to continue with exit.
Could not connect to the Endurance System Management Redirector.
Could not perform request. An invalid action, target, or operation was specified.
Could not perform request. An invalid action was specified.
Could not perform request. An invalid CE was specified.
Could not perform request. An invalid device or element was specified.
Could not perform request. An invalid IOP was specified.
Could not perform request. An invalid operation was specified.
Could not perform request. An invalid option was specified.
Could not perform request. The IOP or CE element number is required.
10
Introduction
Page
page 373
page 373
page 161
page 373
page 374
page 374
page 374
page 374
page 372
page 372
page 47
page 47
page 47
page 48
page 48
page 374
page 374
page 375
page 375
page 375
page 375
page 375
page 375
page 375