HP NetServer AA 4000 Manual page 35

Hp netserver aa 6200 solution release 3.0 messages
Hide thumbs Also See for NetServer AA 4000:
Table of Contents

Advertisement

Chapter 1
Table 1-5HP NetServer AA Message Summary – Prefixed Messages (Continued)
Message
IOPn.MtcMon status: CEx could not be booted because the SCSI boot driver has not
registered with the Monitor on IOPy.
IOPn.MtcMon status: CEx could not be removed or disabled because CE synchronization is
currently in progress.
IOPn.MtcMon status: CEx could not be removed or disabled because it is the only active
CE. Shut down the Windows NT operating system on the CEs instead.
IOPn.MtcMon status: CEx could not be synchronized because auto synch is set to FALSE
on IOPy.
IOPn.MtcMon status: CEx could not be synchronized because the Endurance System
Management Service running on the CE operating system is not yet active.
IOPn.MtcMon status: CEx did not obtain the memory controller type. The presence of ECC
or parity memory cannot be determined.
IOPn.MtcMon status: CEx failed to inhibit IPMI global interrupts.
IOPn.MtcMon status: CEx has been enabled by operator request.
IOPn.MtcMon status: CEx has been removed from service.
IOPn.MtcMon status: CEx has provided platform device information. Chipset: vendor
chipset. Memory mode: mode. IPMI found: Y/N
IOPn.MtcMon status: CEx is available to be booted or synchronized.
IOPn.MtcMon status: CEx is FAULTED and requires repair.
IOPn.MtcMon status: CEx will not be synchronized because the number of processors in
use by the CE operating system (y) exceeds the maximum allowed for the current
Endurance license.
IOPn.MtcMon status: Client registration failed on the local IOP. Client ID = x.
IOPn.MtcMon status: Conflicting IOP IDs have been detected in the Endurance system.
Local IOP ID = x. Remote IOP ID = y.
IOPn.MtcMon status: Differences in client lists with IOPx were detected during IOP
initialization.
IOPn.MtcMon status: Differences with IOPx's CE platform name were detected during IOP
initialization.
IOPx.MtcMon status: Differences with IOPx's product features were detected during IOP
initialization.
Introduction
Page
page 240
page 240
page 241
page 241
page 242
page 242
page 243
page 244
page 244
page 245
page 245
page 246
page 247
page 248
page 249
page 250
page 250
page 251
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netserver aa 6200

Table of Contents