HP NetServer AA 4000 Manual page 244

Hp netserver aa 6200 solution release 3.0 messages
Hide thumbs Also See for NetServer AA 4000:
Table of Contents

Advertisement

Chapter 13
IOPn.MtcMon status: CE synchronization cannot be performed at this time. Windows NT is not fully loaded. The
operation will be retried at a later time.
Severity
Warning
Description
Because the Windows NT operating system is not completely loaded on the CE,
synchronization cannot be performed.
Hardware/Software
This message is generated as a result of a software condition that exists in the CE operating
system.
Action
• CE synchronization is retried automatically. If Windows NT has completed loading by
• If the condition persists, synchronization cannot be performed. In this case, contact your
IOPn.MtcMon status: CE synchronization process aborted due to time out.
Severity
Error
Description
The CE synchronization aborted because the operation timed out. The CE synchronization
timeout is a factor of the memory sizes of the CEs. Synchronization timeouts are typically the
result of a failure of the synchronization slave CE.
Related Messages
IOPn.MtcMon status: The synchronization process has started for CEx.
IOPn.MtcMon status: The synchronization process has failed for CEx.
IOPn.MtcMon status: CEx has been removed from service.
Hardware/Software
This message is typically due to a physical failure of the CE synchronization slave CE
specified in the message.
Action
• Synchronization is retried automatically. If synchronization cannot be performed after
• Examine the event log of the slave CE to determine why it is not capable of
234
that time, synchronization is performed.
service provider for assistance.
multiple retries, the slave CE is faulted and must be repaired or replaced.
synchronization.
MtcMon Messages

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netserver aa 6200

Table of Contents