HP NetServer AA 4000 Manual page 384

Chapter 18
A provider entry in the MTCSMAPI.DLL contains incorrect target data.
Reinstall the Endurance Manager software. If the problem persists, contact your service provider for
assistance.
A required parameter is missing.
The command requires a parameter that was not supplied. Refer to
Administrator's Guide
An action entry in the MTCSMAPI.DLL contains incorrect data.
Reinstall the Endurance Manager software. If the problem persists, contact your service provider for
assistance.
An enumeration entry in the MTCSMAPI.DLL contains incorrect data.
Reinstall the Endurance Manager software. If the problem persists, contact your service provider for
assistance.
Could not connect to the Endurance System Management Redirector.
One of the following problems has occurred:
• The remote Endurance system is not running.
• The system is running, but the MtcSmSrv system service is not running.
• The system is not an Endurance system.
Could not perform request. An invalid action, target, or operation was specified.
An invalid combination of action keyword, device or element name, and/or operation was specified. Refer
to Chapter 5 in
374
or the online help for specific information about the missing parameter.
HP NetServer AA Solution Administrator's Guide
Endurance Manager Messages
Chapter 5 in HP NetServer AA Solution
or the online help for specific information.