HP NetServer AA 4000 Manual page 117

Chapter 6
IOPn.MtcDsl status: Unable to allocate a callback descriptor.
Severity Error
Description The Device Synchronization Layer was unable to allocate memory. This message indicates an
operating system resource condition usually related to insufficient memory in the reporting
IOP.
Related Messages
IOPn.MtcDsl status: Unable to allocate callback worker thread.
IOPn.MtcDsl status: Unable to initialize DSL.
Hardware/Software This message indicates an operating system resource condition caused by insufficient IOP
memory.
Action • Add more memory to the reporting IOP.
• If there is sufficient memory in the IOP, contact your service provider for assistance.
IOPn.MtcDsl status: Unable to allocate a callback worker thread.
Severity Error
Description The Device Synchronization Layer was unable to allocate memory to create a system thread.
This message indicates an operating system resource condition usually related to insufficient
memory in the reporting IOP.
Related Messages
IOPn.MtcDsl status: Unable to allocate callback descriptor.
IOPn.MtcDsl status: Unable to initialize DSL.
Hardware/Software This message indicates an operating system resource condition caused by insufficient IOP
memory.
Action • Add more memory to the reporting IOP.
• If there is sufficient memory in the IOP, contact your service provider for assistance.
IOPn.MtcDsl status: Unable to find a flush descriptor on the global flush list.
Severity Error
Description The Device Synchronization Layer received an unexpected flush packet.
Hardware/Software This message usually indicates an internal HP NetServer AA server software error.
Action If you receive this message, contact your service provider. The IOP encountering this message
can be rebooted and brought back into the HP NetServer AA server. Refer to
NetServer AA Solution Administrator's Guide
MtcDsl Messages
for information about how to reboot an IOP.
Chapter 9 in HP
107