Front Panel Status Messages - HP D5970A - NetServer - LCII Installation Manual

Chapter 12

Front Panel Status Messages

If an error is detected during normal operation of an HP NetServer 8500 function,
the Front Panel Status Messages appear on the LCD display. The status messages
will appear on the display, even if the front panel power switch is turned Off, as
long as, the NetServer remains connected to live AC power.
Table 12-2. Front Panel Error Messages
Display Message
FPC FW Testing Please wait...
FPC x.xx Testing Please wait....
FPC Checksum Err
FPC RAM test failed
FPC Registers test failed
FPC FRU access test failed
FPC LCD test failed
PSC is not ready
PSC Checksum Err
Self-test done FP ready
Reading SEL Please wait
HP NetServer LXr 8500
ERROR: Unable to power on
System is powered off
Description
No error; Status message only.
No error; Status message only.
Non-fatal checksum error.
See Note 1.
Non-fatal front panel controller error.
See Note 2.
Non-fatal front panel controller error.
See Note 2.
Non-fatal front panel controller error.
See Note 2.
Non-fatal front panel controller error.
See Note 2.
Power share controller failure.
See Note 2.
Error detected in controller code.
See Note 1.
No error; Status message only.
No error; Status message only.
No error; Status message only.
Error in power share controller.
See Note 2.
No error: Status message only.
Troubleshooting
145