Table of Contents
Advertisement
If the current user is not assigned the Remote Console privilege, the value Unavailable is displayed.
To navigate to the iLO Integrated Remote Console page, click the Integrated Remote Console link.
•
License Type—The level of licensed iLO firmware functionality.
To navigate to the Licensing page, click the License Type link.
iLO Firmware Version—The version and date of the installed iLO firmware.
•
To navigate to the Installed Firmware page, click the iLO Firmware Version link.
•
IP Address—The network IP address of the iLO subsystem.
•
Link-Local IPv6 Address—The SLAAC link-local address of the iLO subsystem. To navigate to the Network
Summary page, click the Link-Local IPv6 Address link.
•
iLO Hostname—The fully qualified network name assigned to the iLO subsystem. By default, the hostname is ILO,
followed by the system serial number and the current domain name. This value is used for the network name and must
be unique.
System status details
System Health—The server health indicator. This value summarizes the condition of the monitored subsystems,
•
including overall status and redundancy (ability to handle a failure). Lack of redundancy in any subsystem at startup
will not degrade the system health status. The possible values are OK, Degraded, and Critical.
To navigate to the Health Summary page, click the System Health link.
•
iLO Health—The iLO health status, which is based on the combined results of the iLO diagnostic self-tests. The
possible values are OK and Degraded.
To navigate to the Diagnostics page, click the iLO Health link.
•
iLO Security—The iLO security status, which is based on the combined results from the Security Dashboard page.
The possible values are OK, Ignored, and Risk.
To navigate to the Security Dashboard page, click the iLO Security link.
Server Power—The server power state (ON or OFF).
•
To access the virtual power button features, click the Server Power icon.
To navigate to the Server Power page, click the Server Power link.
UID Indicator—The state of the UID LED. The UID LED helps you identify and locate a server, especially in high-
•
density rack environments. The possible states are UID ON, UID OFF, and UID BLINK.
If the iLO Service Port is in use, the UID BLINK status includes the Service Port status. The possible values are UID
BLINK (Service Port Busy), UID BLINK (Service Port Error), and UID BLINK (Service Port Finished).
To turn the UID LED on or off, click the UID Indicator icon, click the UID control at the top of the iLO web interface, or
use the UID buttons on the server chassis.
When the UID is blinking, and then it stops blinking, the status reverts to the previous value (UID ON or UID OFF). If a
new state is selected when the UID LED is blinking, that state takes effect when the UID LED stops blinking.
CAUTION: The UID LED blinks automatically to indicate that a critical operation is underway on the host, such
as remote console access or a firmware update. Do not remove power from a server when the UID LED is
blinking.
Trusted Platform Module or Trusted Module—The status of the TPM or TM socket or module.
•
The possible values are Not Supported, Not Present, or Present-Enabled.
40
Using HPE iLO 5
Advertisement
Table of Contents
