Printing On Custom Size Paper/Long Paper; Loading Custom Size Paper - Oki ES6150 User Manual

P C
RINTING ON USTOM
This section explains how to print on custom size paper such as long paper.
The paper sizes that can be set on this printer are as follows:
Tray 1
Trays 2–4
L C S
OADING USTOM IZE
The way to load custom size paper with the long edge shorter than 356 mm in trays 1 to 4
is the same as loading standard size paper. For details, refer to
To load long paper in tray 1, follow the procedure below:
1. Pull the paper tray out to its maximum.
NOTE
Pull the extendable part out to its maximum. For details on the procedure to
extend the paper tray, refer to
2. Load the paper with the side to be printed facing up. Curl up
the back end of the paper so that it will not fall from the tray.
3. Push the paper tray completely into the printer.
S P /L
IZE APER ONG
LONG EDGE
127–900mm (5"–35.4")
148–356mm (5.8"–14")
P
APER
" Loading Paper" (P. 21)
Printing > 17
P
APER
SHORT EDGE
76–216mm (3"–8.5")
98–216mm (3.9–8.5")
REMARKS
To load long-size
paper with the long
edge exceeding
356mm, load the
paper with the
edge protruding
from the tray.
" Loading Paper" (P. 21).