Table of Contents
Advertisement
G
ETTING STARTED
If you have not already done so, familiarise yourself with the
content of the Installation Safety booklet supplied with your
printer.
R
ETAINING PACKING MATERIALS
After setting up your printer according to the instructions in the Set-up Guide, retain your
packing materials and container in case you ever need to ship or transport your printer.
I
DENTIFYING COMPONENT PARTS
The main parts of your printer are identified and briefly explained below.
F
RONT VIEW
1
9
1.
Power Switch: to turn the printer power ON/OFF.
2.
Operator Panel: contains button switches and indicators (described in detail later see
"Operator panel" on page
3.
Front Feed Paper Tray: to feed cut sheet from the front.
4.
Front Cover: open to fit the front feed paper tray or to fit the tractor.
5.
Platen Knob
6.
Paper Type Lever: set according to the type of paper feed - front feed (cut sheet),
continuous rear feed, continuous front feed or continuous bottom pull.
7.
Pull-up Guide Assembly support
8.
Top Feed Paper Tray: raise to feed cut sheet paper from the top.
9.
Paper Guide: can be adjusted as required to locate the left edge of cut sheet paper.
10.
Top Cover: open and close for access, for example when changing a ribbon
cartridge. Keep closed for noise reduction.
WARNING!
10
2
4
36) that allow you to operate the printer.
Getting started > 9
9
8
7
5
6
Advertisement
Table of Contents
