Self-Diagnostic Mode; Operator Panel - Oki C911 Maintenance Manual

Hide thumbs Also See for C911:
Table of Contents

Advertisement

Oki Data CONFIDENTIAL

5.3.2 Self-diagnostic mode

Image Drums, and, these motors and sensors concerned with each image drum are
named to [Station] in this section (non-used color name). These Stations set 1 to 5 in one
by one in order from upstream-side to downstream-side of at transportation direction of the
intermediate transfer belt.
In this section, these are used '[Station1] to [Station5]' or '[S1] to [S5]' as following figure.
For the 4-color model, [Station1] arrenged at most upstream-side in above direction is not
used. Therefore, the 4-color model is constituted by from [Station2] to [Station5].
Intermediate transfer belt
Belt Drive Roller
Belt creaning blade
Fuser Unit
45530603TH Rev.2
Station2
Station4
or S2
or S4
Station3
Station1
Station5
or S3
or S1
or S5
Waste toner box
Paper
Timing roller
Intermediate transfer roller unit
5.3.2.1
Operation panel
The following description on operating the self-diagnostic is provided, premised on the
following operation panel layout:
This section describes LEVEL 0 and LEVEL 1.
(1) Menu option display switching
Self-diagnostic
The level in a shaded area XXXXX can be displayed only from another one.
mode layout
Use the MENU
(Overall)
non-shaded area XXXXX .
POWER ON
No buttons pressed
Normal operation mode
LEVEL0- engine status display
Engine status display
Each voltage display category in
printing
Toner sensor monitor
Toner pulse count monitor
Consumable tag noise test monitor
Motor control evaluation function
Error code
5. MAINTENANCE MENUS
or MENU
button to display the menu option shown in a
Press the BACK, OK and ON LINE combination after "Ready"
is displayed until System Maintenance menu appears, and
select Engine Diag Mode and press OK.
BACK
LEVEL 1
DIAGNOSTIC MODE XX.XX.XX
OK
SWITCH SCAN
MOTOR CLUTCH TEST
OK
TEST PRINT
REG ADJUST TEST
DENS ADJUST TEST
MEDIA WT ADJUST PA
PAPER WIDTH SNS ADJ
CONSUMABLE STATUS
PRINTER STATUS
FACTORY MODE SET
SENSOR SETTING
LED HEAD DATA
DRUM MANUAL CLEANING
-MODE
5-16

Advertisement

Table of Contents
loading

This manual is also suitable for:

C931C941

Table of Contents