Management Access-Class - Dell Networking 2024 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
User Guidelines
Rules with gigabitethernet, tengigabitethernet, fortygigabitethernet, vlan,
and port-channel parameters are valid only if an IP address is defined on the
appropriate interface. Ensure that each rule has a unique priority.
Example
The following example shows how all ports are denied in the access-list called
mlist
.
console(config)# management access-list mlist
console(config-macal)# deny

management access-class

Use the management access-class command in Global Configuration mode
to restrict management connections. To disable restriction, use the no form
of this command.
Syntax
management access-class {console-only |
no management access-class
name — A valid access-list name. (Range: 1–32 characters)
•
console-only — The switch can be managed only from the console.
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
name
}
Management ACL Commands
1497