Junos Os Release Notes For Juniper Networks M Series Multiservice Edge Routers, Mx Series Ethernet Service Routers, And T Series Core Routers; New Features In Junos Os Release 10.4 For M Series, Mx Series, And T Series Routers; Class Of Service - Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note

JUNOS OS 10.4 Release Notes
Junos OS Release Notes for Juniper Networks M Series Multiservice Edge Routers, MX
Series Ethernet Service Routers, and T Series Core Routers

New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers

6
New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series
Routers on page 6
Changes in Default Behavior and Syntax in Junos OS Release 10.4 for M Series, MX
Series, and T Series Routers on page 42
Issues in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers on page 55
Errata and Changes in Documentation for Junos OS Release 10.4 for M Series, MX
Series, and T Series Routers on page 77
Upgrade and Downgrade Instructions for Junos OS Release 10.4 for M Series, MX Series,
and T Series Routers on page 83
The following features have been added to Junos OS Release 10.4. Following the
description is the title of the manual or manuals to consult for further information.

Class of Service

Hierarchical policer functionality extended to Modular Interface Cards (MICs) (MX
Series routers)—Provides hierarchical policer feature parity with Enhanced Intelligent
Queuing (IQE) PICs. This is useful in provider edge applications using aggregate policing
for general traffic and when applying a separate policer for premium traffic on a logical
or physical interface.
Hierarchical policing on MICs supports the following features:
Ingress traffic is first classified into premium and non-premium traffic before a policer
is applied.
The hierarchical policer contains two policers: premium and aggregate.
Premium traffic is policed by both the premium policer and the aggregate policer. While
the premium policer rate-limits premium traffic, the aggregate policer only decrements
the credits but does not drop packets. Non-premium traffic is rate-limited by the
aggregate policer only, resulting in the following behavior:
Premium traffic is assured to have the bandwidth configured for the premium policer.
Non-premium traffic is policed to the specified rate limit.
For a list of supported MICs, refer to:
http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/
general/mic-mx-series-supported.html
The
logical-interface-policer
hierarchical policer parameters beyond those of the IQE PICs.
You can apply the policer at the inet, inet6, or mpls family level, as follows:
[edit interfaces ge-0/1/0 unit 0 family (inet | inet6 | mpls)]
input-hierarchical-policer Test-HP;
.
and
physical-interface-policer
Copyright © 2011, Juniper Networks, Inc.
statements provide additional