Ts System Messages - Brocade Communications Systems 8 Reference

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

TS System Messages

<timestamp>, [TS-1001], <sequence-number>,, WARNING, <system-name>, NTP Query

failed: <error code>.

Probable Cause

Indicates a network time protocol (NTP) query to the configured external clock server failed. Local

clock time on the principal or primary fabric configuration server (FCS) switch is used for fabric

synchronization.

This might be logged during temporary operational issues such as IP network connection issues to

the external clock server. If it does not recur, it can be ignored.

Verify the configured external clock server is available and functional. If that external clock server is

not available, choose another.

<timestamp>, [TS-1002], <sequence-number>,, INFO, <system-name>, < Type of clock

server used > Clock Server used instead of < Type of clock server configured >:

locl: 0x<code> remote: 0x<code>.

Probable Cause

Indicates the fabric time synchronization distributed from the principal or primary fabric

configuration server (FCS) switch was not sourced from the Type of clock server configured,

instead, an alternate server was used, indicated by Type of clock server used. The type of clock

server used or configured might be either one of the following:

This might be logged during temporary operational issues such as IP network connection issues to

the external clock server or if the fabric is configured for external time synchronization but the

principal or primary FCS does not support the feature. If the message does not recur, it should be

Run the tsClockServer command to verify that the principal or primary FCS switch has the clock

server IP configured correctly. Verify this clock server is accessible to the switch and functional. If

the principal or primary FCS does not support the feature, either choose a different switch for the

role or reset the clock server to LOCL.

Fabric OS Message Reference

53-1001767-01

Local clock on the principal or primary FCS switch

External NTP server address configured

Table of Contents