Trce System Messages - Brocade Communications Systems 8 Reference

TRCE System Messages

TRCE-1001
Message
<timestamp>, [TRCE-1001], <sequence-number>,, WARNING, <system-name>, Trace dump
available< optional slot indicating on which slot the dump occurs >! (reason:
<Text explanation of what triggered the dump. (PANIC DUMP, WATCHDOG EXPIRED,
MANUAL, TRIGGER)>)
Probable Cause Indicates that trace dump files have been generated on the switch or the indicated slot. The reason
field indicates the cause for generating the dump as one of the following:
•
•
•
•
Recommended Run the supportFtp command to set up automatic FTP transfers; then run the supportSave
Action command and contact your switch service provider.
Severity WARNING
TRCE-1002
Message
<timestamp>, [TRCE-1002], <sequence-number>,, INFO, <system-name>, Trace dump<
optional slot indicating on which slot the dump occurs > automatically transferred
to FTP address ' <FTP target designated by user> '.
Probable Cause Indicates that a trace dump has occurred on the switch or the indicated slot and it is successfully
transferred from the switch automatically.
Recommended No action is required.
Action
Severity INFO
TRCE-1003
Message
<timestamp>, [TRCE-1003], <sequence-number>,, ERROR, <system-name>, Trace dump<
optional slot indicating on which slot the dump occurs > was not transferred due
to FTP error.
Fabric OS Message Reference
53-1001767-01
PANICDUMP generated by panic dump
WATCHDOG EXPIRED generated by hardware watchdog expiration
MANUAL generated by the tracedump -n command
TRIGGER when triggered by a specific Message ID generated by CRITICAL RASLog message or
RASLog message trigger setup using the traceTrig command.
Chapter
102
635