Ssm System Messages - Brocade Communications Systems 8 Reference

SSM System Messages

SSMD-1001
Message
<timestamp>, [SSMD-1001], <sequence-number>,, ERROR, <system-name>,Failed to
allocate memory: <function name>.
Probable Cause Indicates that the specified function has failed to allocate memory.
Recommended Check the memory usage on the switch using the memShow command.
Action
Restart or power cycle the switch.
Severity ERROR
SSMD-1002
Message
<timestamp>, [SSMD-1002], <sequence-number>,, ERROR, <system-name>,Failed to
initialize <module> rc = <error>.
Probable Cause Indicates that an initialization of a module within the SSM has failed.
Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Action Command Reference Manual for more information on this command.
Severity ERROR
SSMD-1003
Message
<timestamp>, [SSMD-1003], <sequence-number>,, ERROR, <system-name>,Failed to lock
semaphore mutex: <function name>.
Probable Cause Indicates that the specified function has failed to lock the mutex (semaphore).
Recommended Restart or power cycle the switch.
Action
Severity ERROR
SSMD-1004
Message
<timestamp>, [SSMD-1004], <sequence-number>,, ERROR, <system-name>,Failed to
unlock semaphore mutex: <function name>.
Fabric OS Message Reference
53-1001767-01
Chapter
96
597