Rtwr System Messages - Brocade Communications Systems 8 Reference

RTWR System Messages

RTWR-1001
Message
<timestamp>, [RTWR-1001], <sequence-number>,, ERROR, <system-name>, RTWR
<routine: error message> 0x<detail 1>, 0x<detail 2>, 0x<detail 3>, 0x<detail 4>,
0x<detail 5>
Probable Cause Indicates that an error has occurred in the RTWR. The message provides the name of the routine
having the error, and more specific error information. The values from 1 through 5 provide more
information.
Recommended No action is required.
Action
Severity ERROR
RTWR-1002
Message
<timestamp>, [RTWR-1002], <sequence-number>,, WARNING, <system-name>, RTWR <error
message> 0x<detail1>, 0x<detail2>, 0x<detail3>, 0x<detail4>, 0x<detail5>
Probable Cause Indicates that the RTWR has exhausted the maximum number of retries by sending data to the
specified domain. Possible detail values include:
•
•
•
•
•
•
Recommended Run the fabricShow command to see if the specified domain ID is online.
Action
Enable the switch with the specified domain ID.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers and run the supportSave command then contact your switch service provider.
Severity WARNING
Fabric OS Message Reference
53-1001767-01
RTWRTransmit: Max retries exhausted
detail1: Port
detail2: Domain
detail3: Retry Count
detail4: Status
detail5: Process ID
Chapter
87
497